M64

FIELDS OF APPLICATION

It is a machining center with three axes, characterized by a working range of small / medium size and realized in two versions of the spindle that are employed in applications quite different from each other but have in common the need to have a degree finishing, precision and thermal stability (absence of drifts due to heating of the spindle) particularly high.

Last Updated on 16 November 2022 by Pear

STRUCTURE

The construction form is the classical portal with two axes on the spindle (X and Z) and one on the working plane (Y).

Last Updated on 16 November 2022 by Pear

SPINDLE HSK40

Above were the features of power and torque. Thanks to the protection of the spindle by thermal imaging, you can overload the power output of 100% for a limited time. Then the output power limit should not be interpreted as a limit, but as the average power output limit.

Last Updated on 16 November 2022 by Pear

SPINDLE HSK50

Motor-spindle
Unlike what expected in the conventional construction of an electrospindle in which the rotor / stator are located within the spindle, in this case the spindle is a separate unit from the motor. The transmission of motion between the motor and the spindle is via a direct coupling of our own construction.

Last Updated on 16 November 2022 by Pear

CONTROL DESK

Unlike of what done in most machining centres, it is built in a quite unconventional way.

Read more

It is separated from the machine and this to so that should not be affected negatively by the vibrations generated by the normal use of a numerical control machine. You can program the machine is in a sitting position that standing.

We follow the philosophy of using two Pc IE:

Pc used as a Numerical Control
• Operating System Florenz (derived from Linux)
• RAM Installed Size 4 GB
• Dual Core Processor
• Solid state hard drive (SSD) having a capacity of 30 GB. On this Pc must be installed only the software of Cn. This data storage capacity is thus largely sufficient for all requirements of current and future data storage, even taking into account the natural evolution of Cn software and Linux will have in the coming years.

Programming Pc
• Operating system Windows 8.1 64-bit
• RAM Installed Size 4 GB (expandable to 32GB)
• Dual Core processor with integrated GPU
• Hard disk solid state drive (SSD) 240GB
• Monitor 22″ having a resolution of 1680×1050 pixels
• If considered appropriate, it is possible to install on this Pc any other program provided that is compatible with Windows

Selected Hardware
Both Pc are assembled directly by us and this in order to select the components of the best quality on the market and to have, thanks to the presence of a heat exchanger air/air, the maximum reliability in the time.

PearKey
• Sulla pulsantiera macchina è stata prevista una porta USB su cui inserire una chiavetta, normalmente reperibile in commercio, con cui determinare a quali programmi l’operatore a cui è stata assegnata tale chiavetta ha diritto ad avere accesso.
• Una singola chiavetta può personalizzare l’accesso ai programmi di macchine diverse e per ogni macchina possono essere determinati programmi diversi a cui tale operatore ha la possibilità di avere accesso.
• Se ritenuto utile su tale chiavetta possono essere memorizzati anche altri dati.

Last Updated on 16 November 2022 by Pear

TOOL CHANGER

Tool changer for head spindle type S
It is a drum having a diameter not too large in which the head of the machine picks/deposits directly, using the movements of the X and Z axes, the toolholder.

Last Updated on 16 November 2022 by Pear

Z32 NC

NC Hardware
Built on basic PCs, it is transformed into numerical control thanks to the presence of the Master Link board that is housed inside the control cabinet and manage the axes at the top of the high-speed performance.

Last Updated on 16 November 2022 by Pear

MAIN OPTIONS

Molto vasto è l’elenco degli accessori fornibili a richiesta. Gran parte degli accessori sono fornibili solo in prima fornitura quindi fate attenzione a farvi fare un’offerta con tutte le voci di vostro potenziale interesse in modo tale da configurare la vostra macchine nel modo da voi ritenuto migliore.

Last Updated on 16 November 2022 by Pear

DOWNLOAD

Le foto contenute nei vari file che è possibile scaricare da questa pagina web, sono state salvate in bassa risoluzione e questo per per rendere il download veloce e pratico.

Last Updated on 16 November 2022 by Pear