-
https://www.pear.it/wp-content/uploads/slideshow-gallery/01_Ec1220_CT_GB.jpg
The two front doors also give you access to pieces of important dimensions supported from above by ropes
-
https://www.pear.it/wp-content/uploads/slideshow-gallery/02_Ec1220_CT_GB.jpg
Rear View
-
https://www.pear.it/wp-content/uploads/slideshow-gallery/03_Ec1220_CT_GB.jpg
Side view of the opposite side with respect to the operator. Even in this case remarkable is the size of the access door
-
https://www.pear.it/wp-content/uploads/slideshow-gallery/04_Ec1220_CT_GB.jpg
Side view on the operator side. Note the important dimension of the access door to the inside
-
https://www.pear.it/wp-content/uploads/slideshow-gallery/05_Ec1220_CT_GB.jpg
Plan view
-
https://www.pear.it/wp-content/uploads/slideshow-gallery/06_Ec1220_CT_GB.jpg
This drawing shows the maximum thickness of the work piece and the various lengths max and minimum of the tool
-
https://www.pear.it/wp-content/uploads/slideshow-gallery/Divisoreincontinuo_GB.jpg
Dividing table in continuous model DC23 is made using the "torque motor" technology, allows the mounting of pieces having max diameter of 230 mm
-
https://www.pear.it/wp-content/uploads/slideshow-gallery/DSC_9609_GB.jpg
Dividing table in continuous model DC23 has been placed outside the working area with which does not interfere at all
Previous Image
Next Image
Overall dimensions |
3,100×5,000×2,680 mm |
Net working travels |
X=1,200 mm Y=2,000 mm Z=400 mm |
Maximum workpiece thickness under the bridge |
310 mm |
Maximum distance from maximum thickness piece to attack tool holder |
190 mm |
Minimum distance between the work plan and attack tool holder |
105 mm |
Minimum distance between the work plan and the standard tool nut |
25 mm |
Tool holder HSK40/E |
DIN 69893 |
Maximum RPM |
32,000 |
Spindle power continuous duty (S1) |
12 Kw |
Max torque spindle |
9.3 Nm |
Rigid tapping standard |
|
Preset tool length standard accessory |
|
Total weight |
extimated 9,000 Kg |
|
|
AXES |
|
Working speed |
from 0 to 30,000 mm per min |
Rapid traverse rate |
30 meters per min |
Maximum thrust on each axis |
500 N |
Acceleration on three axes |
5.0 m/s2 |
Positioning precision (VDI 3441) |
± 0.01 mm |
Repeatability accuracy (VDI 3441) |
± 0.005 mm |
|
|
WORKING TABLE |
|
Dimensions |
1,280×2,160 mm |
Threaded holes clamping pieces |
M12x18 |
Total number of holes |
589 |
Distance between holes |
70×70 mm |
|
|
TOOL CHANGER |
|
Number of tools available |
35 |
Maximum tool Ø |
34 mm |
Max tool locked with standard collect Ø |
16 mm |
Maximum tool lenght |
190 mm |
Tool change time chip to chip average |
10 sec |
Time to swap tools |
3 sec |
Updated Friday December 2nd, 2016